Security & Surveillance Solutions
in Riyadh, Saudi Arabia
Rawadh designs, installs, and supports CCTV, access control, biometric, and fire safety systems as one connected system, not five disconnected vendors. Delivered across Saudi Arabia, the UK, and Germany.
What are security & surveillance solutions?
Most sites end up with cameras from one vendor, door access from another, and a fire system from a third, none of them talking to each other. Rawadh brings CCTV, access control, biometrics, RFID, and fire safety together into one system, so an alarm in one triggers the right response across all of them.
CCTV
Cameras only help if footage is usable when you need it, clear enough to identify a face, stored long enough to matter, and actually monitored rather than recording into a void. Rawadh designs CCTV systems around coverage and image quality first, not just camera count.
- Camera Selection — Bullet, dome, and PTZ cameras matched to lighting, distance, and what actually needs to be seen.
- Network & Storage — NVR/DVR setup sized for your retention period, not the minimum that ships in the box.
- Remote Monitoring — Live access from phone or desktop, so footage isn't locked to one screen onsite.
- Analytics — Motion detection, line-crossing, and object-left-behind alerts where they add real value.
- Integration — Tied into access control and alarm systems so one event triggers the right response across systems.
Where this gets used:
- Warehouses and industrial sites needing coverage across large, low-light areas.
- Offices upgrading from an old analogue system that no longer meets image quality needs.
- Retail and residential sites wanting remote viewing from a phone, not just an onsite monitor.
- Multi-site businesses needing centralised camera management across locations.
Access Control
Keys get copied and cards get lost. Access control replaces both with credentials that can be revoked instantly and logged automatically, so you know exactly who went where and when.
- System Design — Access levels planned around departments, shifts, and restricted zones, not a blanket setup.
- Reader & Credential Selection — Card, PIN, mobile, or biometric readers matched to the security level each door actually needs.
- Door Hardware — Electric strikes, maglocks, and turnstiles installed and wired to fail safely if power is lost.
- Software & Management — Centralised platform to add, remove, or adjust access without touching hardware.
- Integration — Connected with CCTV, fire alarm, and time-attendance systems for one unified view.
Where this gets used:
- Offices replacing lost or copied keys with a system that can be revoked instantly.
- Multi-tenant buildings needing different access levels per floor or department.
- Sites requiring detailed access logs for compliance or audit purposes.
- Businesses wanting time-attendance tracking built into the same system.
Biometric Systems
Biometric credentials can’t be lent, copied, or forgotten at home, which makes them the most reliable layer for restricted areas. Rawadh installs fingerprint, facial recognition, and other biometric systems suited to how fast and touch-free access needs to be.
- Fingerprint Readers — Fast, accurate verification for doors, turnstiles, and restricted rooms.
- Facial Recognition — Touchless verification, useful for high-traffic or hygiene-sensitive entrances.
- Multi-Factor Options — Biometrics paired with a card or PIN for higher-security areas.
- Enrolment & Management — Centralised enrolment so adding or removing users doesn't mean reconfiguring every reader.
- Integration — Tied into access control and time-attendance systems already in place.
Where this gets used:
- Server rooms, data centres, and other spaces where credential sharing isn't acceptable.
- Hygiene-sensitive environments wanting touchless entry.
- Staff time-attendance tracking that can't be falsified with a shared card.
- High-security zones needing more than one layer of verification.
RFID Solutions
RFID tags track people, assets, or inventory without line-of-sight scanning, which makes it useful well beyond just door access. Rawadh deploys RFID for access credentials, asset tracking, and inventory management depending on what actually needs tracking.
- Access Credentials — Proximity cards and key fobs for standard door access.
- Asset Tracking — Tags on equipment or inventory so location and movement are logged automatically.
- Readers & Infrastructure — Fixed or handheld readers positioned for reliable read range.
- Software Integration — Tracking data tied into existing inventory or access control systems.
- Vehicle & Gate Access — Long-range RFID for vehicle gates and parking access without manual checks.
Where this gets used:
- Warehouses tracking equipment or inventory movement automatically.
- Offices needing a simple, low-cost credential for standard door access.
- Sites with vehicle gates wanting hands-free entry for authorised vehicles.
- Asset-heavy businesses wanting to reduce manual stock-checking.
Fire Alarm Systems
A fire alarm system is only as good as its coverage and its wiring, sensors placed where they’ll actually catch a fire early, and cabling that keeps working during the emergency it’s meant to detect. Rawadh designs, installs, and commissions fire detection systems to meet life-safety requirements, not just pass a checklist.
- Detection Design — Sensor placement planned around building layout and fire risk zones, not evenly spaced regardless of need.
- Panels & Control — Fire alarm control panels configured and zoned for fast, accurate response.
- Wiring & Cabling — Fire-rated cabling is installed to standard so circuits stay live during an actual fire.
- Integration — Tied into access control, HVAC, and elevators to trigger the right response automatically.
- Testing & Commissioning — Full system testing before handover, with documentation for compliance.
Where this gets used:
- New builds needing a fire detection system designed from the ground up.
- Older buildings with fire systems that no longer meet current code.
- Warehouses and high-ceiling spaces needing specialized detection like beam or air-sampling systems.
- Sites needing fire alarm integration with access control for automatic door release during an emergency.
Fire Alarm Products
Not every project needs a full design-and-install service, sometimes it’s a straightforward supply of the components a system depends on. Rawadh supplies fire alarm panels, detectors, sounders, and certified fire-rated cabling for teams handling their own installation or maintenance.
- Control Panels — Conventional and addressable fire alarm panels from established manufacturers.
- Detectors — Smoke, heat, and multi-sensor detectors for different risk environments.
- Sounders & Beacons — Audible and visual alarm devices for spaces where clear alerts save time.
- Fire-Rated Cabling — Low smoke, zero halogen, fire-resistant cabling that meets recognised wiring standards.
- Accessories — Call points, isolators, and mounting hardware to complete a system.
Where this gets used:
- Contractors and system integrators needing certified components for their own installs.
- Facilities teams replacing individual failed components rather than a full system.
- Projects specifying particular manufacturers or certifications for compliance.
- Businesses stocking spares for faster response if a component fails.
Integrated Security Services
Most sites end up with CCTV from one vendor, access control from another, and a fire system from a third, none of them talking to each other. Rawadh brings these together into one system with one point of contact, so an event in any one of them triggers the right response across all of them.
- System Integration — CCTV, access control, biometric, RFID, and fire alarm systems are connected into a single platform.
- Centralised Monitoring — One dashboard for live footage, access events, and alarm status, instead of five logins.
- Automated Response — Rules-based actions, a fire alarm triggering door release, and an access breach triggering camera focus.
- Ongoing Support — Maintenance agreements and monitoring so systems stay reliable after handover.
- Consultancy & Design — Security planning from the ground up for new builds or major renovations.
Where this gets used:
- New builds wanting security designed in from the start rather than bolted on later.
- Sites running multiple disconnected security systems that need to be unified.
- Multi-site businesses wanting centralised monitoring across every location.
- Facilities requiring documented, code-compliant integration for insurance or regulatory purposes.
Our Process
- Assess — site survey and risk assessment to understand what actually needs protecting
- Design — a system spec covering cameras, access points, detection, and integration together
- Install — deployed and commissioned by our own engineers
- Support — ongoing monitoring and maintenance so systems stay reliable
FAQ
-
Can you integrate CCTV, access control, and fire alarm systems that are already installed separately?
Yes, in most cases. We assess what's in place and connect it into one system rather than replacing everything.
-
Do biometric systems work with masks or gloves?
Facial recognition is generally reliable with masks. Fingerprint readers need bare skin contact. We can advise on the right mix for your site.
-
Is RFID secure enough for building access?
For most standard use cases, yes. For higher-security areas, we usually recommend pairing it with a biometric or PIN layer.
-
What's the difference between fire alarm systems and fire alarm products?
Systems are the full design, install, and commissioning service. Products are individual components, panels, detectors, cabling, supplied on their own for teams handling their own installation.
-
Do you provide ongoing monitoring, or just installation?
Both. We offer monitoring and maintenance agreements so systems get checked regularly instead of forgotten after handover.
-
Can access control integrate with time attendance?
Yes. Most of our access control deployments double as attendance tracking without extra hardware.
-
Do your systems meet Saudi fire and security codes?
Yes. All our fire and security installations are designed and commissioned to meet applicable Saudi standards.
-
Do you work with businesses outside Saudi Arabia?
Yes, we run the same services through our UK and Germany teams.
Services
Any Questions? Let’s talk
- Al Haram Project
- Mall of Saudi Project
- Saudi Railway
- NEOM Office Project
- Qiddiya Road Project